Scaffolding Panel Foot Pedal Scaffolding Platform Roll Forming Machine
Main Parameter
Technics flow
Decoiling→feeding steel strip→levelling→sheet leveling→ punchine to length→cut to length→roll forming→run out table
Machine components:
De-coiler------------------------------------------1set
Leveling device----------------------------------1set
Forming machine-------------------------------1set
Punching and Cutting device -----------------1set
PLC control box ---------------------------------1set
Hydraulic pump station-------------------------1set
Production support table-----------------------1set
| No. | Item | Description |
| 1 | Decoiler | Electrical type, 5tons |
| 2 | Machine frame | 350H beam welded, polish |
| 3 | Machine structure | steel wall panel, 20mm |
| 4 | Shaft | 80mm |
| 5 | Chain | Single chain 2' |
| 6 | Main motor power | 2*7.5kw |
| 7 | Forming steps | 18 steps |
| 8 | Roller material | High grid GCR15 |
| 9 | Cutting method | Hydraulic cutting |
| 10 | Cutter blade material | Cr12,HRC58°-60° |
| 11 | Suitable material thickness | 1.2-2.0mm |
| 12 | Control system | PLC |
| 13 | Punching device | 100tons Punching machine, servo feeding, inluding one set mould |
Detial Parameter
Decoinler
‹1›inner diameter of the coil:350-450mm
‹2› Max coil width :800mm
‹3›coil load: 3.0T
Forming Device:
‹1› Shaft material:Gcr15steel
‹2› roller material :Gcr15steel
‹3› transmission: Gear box
‹4› forming speed:15-20m/min
‹5› No. of forming rollers :15groups
‹6› Voltage:380V,50Hz
(7)Machine power:18.5kw
4.Punching and Cutting System:
advanced hydraulic drive, automatically cutting after forming,
no distorting or wasting, high level safety factor.
‹1› Power:7.5kw
‹2› Blade material :Cr12mov
‹3› Punching die material: Cr12mov
5.Control System:
Computer is used to control length and quality,
Machine can cut and stop automatically when required length is achieve
Installation and Training:
a.If buyers visit our factory and inspect the machines, we will teach you how to install and operate the machine, and also train buyer's workers/technicians on live.
b.No visit, we will send you instruction manual and videos to teach you how to install and operate.
c.If buyer needs our technicians to go to their factory, it needs round air ticket, accommodation and etc.
After Service
a.24moths guarantee for the whole machine.
b.24 hours technical support by email, Skype, WhatsApp, Wechat or phone call.
c.Suppose some parts were damaged, we would replace for free by express delivery within warranty period.
Product Tags:
|
|
Scaffolding 2.0mm Panel Roll Forming Machine For Foot Pedal Scaffolding Platform Images
|
